R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

168
Field Description
Interface State
Name of the interface to which the PVC belongs, and the physical and
administrative states of the interface
State of an interface (not a subinterface):
• UP—The interface is both physically and administratively up.
• DOWN—The interface is administratively up and physically down
(probably because no physical link is available or the link has failed),
or the interface is shut down with the shutdown command
(administratively down).
State of a subinterface:
• UP—The interface is administratively up. The parent interface is both
physically and administratively up.
• DOWN—The interface or its parent interface is shut down with the
shutdown command, or the parent interface is physically down.
OAM State OAM protocol state: UP or DOWN.
PVC State
PVC state:
• UP—The following states are up:
{ State of the ATM interface to which the PVC belongs.
{ Shutdown state.
{ OAM state.
• DOWN—At least one of the following states is down:
{ State of the ATM interface to which the PVC belongs.
{ Shutdown state.
{ OAM state.
Input: 0 packets, 0 bytes, 0 errors Counts of received packets, bytes, and packet errors.
Output: 0 packets, 0 bytes, 0 errors Counts of transmitted packets, bytes, and packet errors.
Output queue QoS packet output queue information of the PVC.
OAM cells received Counts of received OAM cells.
F5 Loopback Counts of received F5 Loopback cells.
F5 AIS
Number of received AIS cells.
If the AIS alarm state is not supported, this command displays only the
number of AIS cells, rather than the AIS alarm state in the OAM AIS State
field.
F5 RDI
Number of received RDI cells.
If the RDI alarm state is not supported, this command displays only the
number of RDI cells, rather than the RDI alarm state in the OAM RDI State
field.
OAM cells sent Number of transmitted OAM cells.
F5 Loopback Number of transmitted F5 Loopback cells.
OAM cell drops Number of dropped OAM cells.