R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

169
Field Description
OAM AIS State
AIS alarm state:
• No AIS Alarm—No OAM AIS alarm.
• E2E AIS Alarm—End-to-end OAM AIS alarm.
If alarm state is supported, this command displays only the alarm state,
rather than the number of cells in the F5 AIS field.
OAM RDI State
RDI alarm state:
• No AIS Alarm—No OAM RDI alarm.
• E2E AIS Alarm—End-to-end OAM RDI alarm.
If alarm state is supported, this command displays only the alarm state,
rather than the number of cells in the F5 RDI field.
OAM CC State
CC alarm state:
• No CC Alarm—No OAM CC alarm.
• E2E CC Alarm—End-to-end OAM CC alarm.
display interface virtual-ethernet
Use display interface virtual-ethernet to display VE interface information.
Syntax
display interface [ virtual-ethernet [ interface-number ] ] [ brief [ description | down ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-number: Specifies a VE interface by its number.
brief: Displays brief interface information. If you do not specify this keyword, this command displays
detailed interface information.
description: Displays complete interface descriptions. If you do not specify this keyword, the command
displays only the first 27 characters of interface descriptions.
down: Displays information about interfaces in physically down state and the causes. If you do not
specify this keyword, this command displays information about interfaces in all states.
Usage guidelines
If you do not specify the virtual-ethernet keyword, this command displays information about all
interfaces on the device.
If you specify the virtual-ethernet keyword without the interface-number argument, this command
displays information about all existing VE interfaces.
Examples
# Display detailed information about VE interface Virtual-Ethernet 2/4/1.
<Sysname> display interface virtual-ethernet 2/4/1