R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

177
Default
No mapping is configured.
Views
PVC view, PVC-group view
Predefined user roles
network-admin
Parameters
vt-number: Specifies the number of the VT interface corresponding to a PPPoA mapping. The VT interface
must have been created.
Usage guidelines
aal5snap and aal5mux encapsulations support PPPoA mapping.
A PVC or PVC-group can be mapped to only one VT interface.
This command is not applicable to PVCs in a PVC-group.
Examples
The following example demonstrates a complete process of PPPoA configuration.
# Create a VT interface Virtual-Template 10, and configure an IP address for it.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10] ip address 202.38.160.1 255.255.255.0
[Sysname-Virtual-Template10] quit
# Create PVC 1/101 on interface ATM 2/4/0.
[Sysname] interface atm 2/4/0
[Sysname-ATM2/4/0] pvc 1/101
# Create a PPPoA mapping using the created VT interface.
[Sysname-ATM2/4/0-pvc-1/101] map ppp virtual-template 10
Related commands
encapsulation
mtu
Use mtu to configure the MTU for an ATM interface.
Use undo mtu to restore the default.
Syntax
mtu size
undo mtu
Default
The MTU of the interface is 1500 bytes.
Views
VE interface view, VE subinterface view