R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

184
Use pvc to create a PVC for a PVC group and enter PVC view.
Use undo pvc to remove the specified PVC from a PVC-group and delete the PVC.
Syntax
pvc { pvc-name [ vpi/vci ] | vpi/vci }
undo pvc { pvc-name | vpi/vci }
Default
No PVC is created.
Views
ATM interface view, ATM subinterface view, PVC-group view
Predefined user roles
network-admin
Parameters
pvc-name: Specifies a PVC by its name, a case-sensitive string of 1 to 15 characters excluding slashes (/)
and hyphens (-). For example, neither 1/20 nor a-b is a valid PVC name.
vpi/vci: Specifies a PVC by its VPI and VCI values. The value range for the vpi argument is 0 to 255. The
value range for the vci argument depends on the interface type. For more information, see Table 40. T
he
values of the vpi and vci arguments cannot be 0 at the same time. HP recommends not using VCI values
0 through 31 because they are reserved for special purposes.
Table 40 VCI value ranges for different interface types
Interface type VCI value range
ATM ADSL 0 to 255
ATM ADSL2+ 0 to 255
ATM G.SHDSL 0 to 255
ATM SHDSL_4WIRE 0 to 255
ATM SHDSL_4WIRE_BIS 0 to 255
ATM SHDSL_8WIRE_BIS 0 to 255
ATM E1 0 to 511
ATM T1 0 to 511
ATM E3 0 to 1023
ATM T3 0 to 1023
ATM OC-3c/STM-1 0 to 1023
ATM OC-12c/STM-4 0 to 1023
ATM 25M 0 to 1023
ATM subinterface
Same as that of the ATM interface to which the ATM
subinterface belongs.
PVC-group
Same as that of the ATM interface to which the
PVC-group belongs.