R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

188
Usage guidelines
Before you collect traffic statistics within a specific time period on an interface, clear the existing statistics
for the interface.
If you do not specify the virtual-ethernet keyword, this command clears statistics for all interfaces.
If you specify the virtual-ethernet keyword without the interface-number argument, this command clears
statistics for all VE interfaces.
If you specify both the virtual-ethernet keyword and the interface-number argument, this command
clears statistics for the specified VE interface.
Examples
# Clear statistics for interface Virtual-Ethernet 2/4/2.
<Sysname> reset counters interface virtual-ethernet 2/4/2
service cbr
Use service cbr to specify the PVC service type as CBR, and specify the related parameters.
Use undo service to restore the default.
Syntax
service cbr output-pcr [ cdvt cdvt_value ]
undo service
Default
The service type of a PVC is UBR. The peak output rate of ATM cells equals to the maximum bandwidth
of the interface to which the PVC belongs.
Views
PVC view, PVC view in a PVC-group
Predefined user roles
network-admin
Parameters
output-pcr: Specifies the peak output rate of ATM cells in kbps. Table 41 shows the value ranges for the
output-pcr argument on different interfaces.
Table 41 Peak output rate value ranges
Interface type Peak output rate value range
ATM ADSL 64 to 640
ATM ADSL2+ 64 to 1200
ATM G.SHDSL 64 to 2312
ATM SHDSL_4WIRE 128 to 4624
ATM SHDSL_4WIRE_BIS 128 to 11392
ATM SHDSL_8WIRE_BIS 256 to 22784
ATM E1 64 to 1920
ATM T1 64 to 1536