R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

194
Views
PVC view, PVC view in a PVC-group
Predefined user roles
network-admin
Examples
# Bring up PVC 0/100 on ATM interface ATM 2/4/0.1.
<Sysname> system-view
[Sysname] interface Atm 2/4/0.1
[Sysname-ATM2/4/0.1] pvc 0/100
[Sysname-ATM2/4/0.1-pvc-0/100] undo shutdown
# Bring up PVC 1/101 in PVC-group 1.
<Sysname> system-view
[Sysname] interface atm 2/4/0
[Sysname-ATM2/4/0] pvc-group 1
[Sysname-ATM2/4/0-pvc-group-1] pvc aa 1/101
[Sysname-ATM2/4/0-pvc-group-1-pvc-aa-1/101] undo shutdown
transmit-priority
Use transmit-priority to configure the transmission priority for a PVC associated with the UBR, VBR-NRT,
or VBR-RT service.
Use undo transmit-priority to restore the default.
Syntax
transmit-priority value
undo transmit-priority
Default
The transmission priorities of the UBR service, VBR-NRT service, and VBR-RT service are 0, 5, and 8.
Views
PVC view, PVC view in a PVC-group
Predefined user roles
network-admin
Parameters
value: Specifies the transmission priority in the range of 0 to 9. A higher value indicates a higher priority.
Usage guidelines
The value range for the transmission priority varies with service types:
• 0 to 4 for the UBR service.
• 5 to 7 for the VBR-NRT service.
• 8 to 9 for the VBR-RT service.
PVCs with higher priorities occupy more bandwidths. PVCs with the same priority occupy the same
bandwidth.
If you change the service type of a PVC, the transmission priority of the PVC is restored to the default.