R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

199
Use undo modem auto-answer to disable auto-answer mode.
Syntax
modem auto-answer
undo modem auto-answer
Default
Auto-answer mode is disabled. The modem answers a call only when it receives the AT command from
the router.
Views
User line view
Predefined user roles
network-admin
Usage guidelines
To ensure correct operation of the modem, set the auto-answer mode on the user line to be the same as
the modem.
• Enable auto-answer mode if the modem is in auto-answer mode (the AA LED of the modem lights
up). This setting prevents the router from issuing a duplicate answer command after the modem
answers a call.
• Disable auto-answer mode if the modem is not in auto-answer mode.
This command is available on the following user lines:
• TTY lines for the following interfaces:
{ AM interface
{ Asynchronous serial interface
{ Asynchronous/synchronous serial interface operating in asynchronous mode
• AUX line
This command is not available on the console or VTY lines.
To display the user line for an interface, use the display line command.
Examples
# Enable auto-answer mode on TTY 1.
<Sysname> system-view
[Sysname] line tty 1
[Sysname-line-tty1] modem auto-answer
Related commands
modem caller-number resolve
modem callback
Use modem callback to enable the callback function.
Use undo modem callback to restore the default.
Syntax
modem callback