R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

208
Field Description
Diagnostics Monitor
Diagnostic and monitoring (DM) status:
• Open—DM is enabled.
• Close—DM is disabled.
Current Service Status
Service status of the modem:
• Service available—The modem is providing services correctly.
• Emergency—The modem is providing limited services. The cellular interface
is not available.
• No service—The modem cannot provide services. The cellular interface is
not available.
• Low power—The modem is in low power mode. The cellular interface is not
available.
Current Service
Current service type:
• Circuit-switched—Serves for the CS domain only.
• Packet-switched—Serves for the PS domain only.
• Combined—Serves for both the CS and PS domains.
• Invalid—Invalid service.
Packet Service Whether the 3G modem is attached to the PS domain.
Current Roaming Status Roaming status: Roaming or Home.
Network Selection Mode Network selection mode: Manual or Automatic.
Network Connection Mode
Network connection mode:
• WCDMA only—Connected to the WCDMA network only.
• WCDMA precedence—Connected to the WCDMA network with preference.
• GSM only—Connected to the GSM network only.
• GSM precedence—Connected to the GSM network with preference.
Current Network Connection
Current network:
• No Service.
• GSM.
• GPRS.
• EDGE.
• WCDMA.
• HSDPA.
• HSUPA.
• HSDPA and HSUPA.
• HSPA+.
• Unknown.
Mobile Country Code (MCC)
The MCC is displayed if the modem has found the mobile network. For
example, the MCC of China is 460.
Mobile Network Code
(MNC)
The MNC is displayed if the modem is successfully registered with the mobile
network. For example, the code of the GSM network of China Mobile is 00.
Location Area Code (LAC)
The LAC is displayed if the modem is successfully registered with the mobile
network.
Cell ID
The Cell ID is displayed if the modem is successfully registered with the mobile
network.