R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

209
Field Description
Current Band
Current band selection mode:
• GSM.
• WCDMA.
• ANY.
• AUTO.
Current RSSI
Current RSSI:
• An RSSI value in the range of –110 dBm to –51 dBm.
• Unknown—No signal. The cellular interface is unavailable.
PIN Verification
PIN authentication status:
• Disabled.
• Enabled.
PIN Status
PIN status:
• Ready—The SIM card is ready.
• PIN Requirement—Requires you to execute the pin verify command to enter
the PIN for PIN verification.
• PUK Requirement—Requires you to execute the pin unlock command to
unlock the SIM or UIM card. This item is displayed when the card is locked.
Number of Retries remaining Remaining retries for entering the PIN or PUK.
SIM Status
SIM card status:
• OK—The SIM card is normal.
• Network Reject—The SIM card is denied access to the network. The cellular
interface is not available.
• Not Insert—The SIM card is absent. The cellular interface is not available.
# Display call connection information for Cellular 2/0/0 (TD-SCDMA network).
<Sysname> display cellular 2/0/0
Cellular2/0/0:
Hardware Information:
Model: ET128
Modem Firmware Version: 11.101.01.08.00
Hardware Version: CS31TCPU
International Mobile Subscriber Identity (IMSI): 460079011105842
International Mobile Equipment Identity (IMEI): 860039002369111
Factory Serial Number (FSN): GQ4CAB1942911350
Modem Status: Online
Profile Information:
Profile 1: Active
PDP Type: IPv4
Header Compression: Off
Data Compression: Off
Access Point Name (APN): cmnet
Packet Session Status: Active
Network Information:
Current Service Status: Service available
Network Selection Mode: Automatic