R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

212
# Display call connection information for Cellular 2/0/0 (CDMA network).
<Sysname> display cellular 2/0/0
Cellular2/0/0:
Hardware Information:
Model: EC169
Manufacturer: ********
Modem Firmware Version: 11.002.03.01.45
Hardware Version: CE62TCPUVer A
Electronic Serial Number (ESN): c1836f2d
Preferred Roaming List (PRL) Version: 0
International Mobile Subscriber Identity (IMSI): 460036101433925
Modem Status: Online
Network Information:
Current Service Status: Service available
Current Roaming Status: Home
Network Connection Mode: Manual
Current Network Connection: 1xRTT/EVDO HYBRID
Downstream Bandwidth: 3100000 bps
Radio Information:
Current RSSI(1xRTT): -93 dBm
Current RSSI(EVDO): -75 dBm
Current Voltage: 3336 mV
Modem Security Information:
PIN Verification: Disabled
PIN Status: Ready
Number of Retries remaining: 3
UIM Status: OK
Table 45 Command output
Field Description
Model Modem name.
International Mobile Subscriber Identity (IMSI) IMSI string of the UIM card.
Modem Status
Status of the modem:
• Online—The modem is powered on.
• Offline—The modem is powered off or in low power mode.
The cellular interface is not available.
Current Service Status
Service status of the modem:
• Service available—The modem is providing services
correctly.
• Emergency—The modem is providing limited services. The
cellular interface is not available.
• No service—The modem cannot provide services. The
cellular interface is not available.
• Low power—The modem is in low power mode. The
cellular interface is not available.
Current Roaming Status Roaming status: Roaming or Home.
Network Selection Mode Network selection mode: Manual or Automatic.