R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

229
Examples
# Specify the profiles numbered 1 and 2 as the primary and backup profiles, respectively.
<sysname>system-view
[sysname]interface Cellular 0/0
[sysname-Cellular0/0]profile main 1 backup 2
reset counters controller cellular
Use reset counters controller cellular to clear statistics for a cellular interface.
Syntax
reset counters controller cellular [ cellular-number ]
Views
User view
Predefined user roles
network-admin
Parameters
celluar-number: Specifies a cellular interface by its number. If no interface is specified, this command
clears statistics for all cellular interfaces.
Usage guidelines
To collect traffic statistics on an interface during a period of time, first use the reset counters controller
cellular command to clear the existing statistics on the interface.
Examples
# Clear statistics for Cellular 2/0/0.
<Sysname> reset counters controller cellular 2/0/0
Related commands
display controller cellular
sendat
Use sendat to issue a configuration directive to a 3G/4G modem.
Syntax
sendat at-string
Views
Cellular interface view
Predefined user roles
network-admin
Parameters
at-string: Specifies a configuration directive string, a string of 1 to 300 characters. This argument can be
an AT directive (containing +++, A/, or be any string beginning with AT) or a CNS directive. For more
information about AT directives, see the sendat command in Layer 2—WAN Access Command
References. Table 61 de
scribes the CNS directive samples.