R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

231
3G modem-specific management commands
serial-set
Use serial-set to channelize a cellular interface into a synchronous/asynchronous serial interface.
Use undo serial-set to delete a synchronous/asynchronous serial interface channelized from a cellular
interface.
Syntax
serial-set set-number
undo serial-set set-number
Views
Cellular interface view
Predefined user roles
network-admin
Parameters
set-number: Specifies the serial interface number. The value is 0.
Usage guidelines
The command names the serial interface as serial cellular-number:set-number.
Examples
# Channelize Cellular 2/0/0 into a serial interface.
<Sysname> system-view
[Sysname] controller cellular 2/0/0
[Sysname-Cellular2/0/0] serial-set 0
4G modem-specific management commands
bandwidth
Use bandwidth to configure the expected bandwidth for an Eth-channel interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Default
The expected bandwidth (in kbps) is the interface baud rate divided by 1000.
Views
Eth-channel interface view
Predefined user roles
network-admin