R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

235
Field Descri
p
tion
Line protocol state
Data link layer protocol state of the interface:
• UP.
• DOWN.
• UP(spoofing)—The data link layer protocol state of the interface is
up but the link is an on-demand link or not present at all.
Description Description for the interface.
Bandwidth Expected bandwidth of the interface.
Maximum Transmit Unit MTU of the interface.
Internet protocol processing: disabled IP packet processing is disabled.
Internet Address is
192.168.1.200/24 Primary
Primary IP address of the interface, which is assigned automatically by
the service provider.
IP Packet Frame Type IPv4 packet framing format.
Hardware Address MAC address of the interface.
IP Packet Frame Type IPv6 packet framing format.
Output queue - Urgent queuing:
Size/Length/Discards
Packet statistics for urgent queuing in the output queue of the interface:
• Size—Current number of packets in the queue.
• Length—Maximum number of packets that can stay in the queue.
• Discards—Number of dropped packets.
Output queue - Protocol queuing:
Size/Length/Discards
Packet statistics for protocol queuing in the output queue of the
interface:
• Size—Current number of packets in the queue.
• Length—Maximum number of packets that can stay in the queue.
• Discards—Number of dropped packets.
Output queue - FIFO queuing:
Size/Length/Discards
Packet statistics for FIFO queuing in the output queue of the interface:
• Size—Current number of packets in the queue.
• Length—Maximum number of packets that can stay in the queue.
• Discards—Number of dropped packets.
Last clearing of counters
Time when statistics on the logical interface were last cleared by using
the reset counters interface command.
If the statistics of the interface have never been cleared by using the
reset counters interface command since the device started, this field
displays Never.
Last 300 seconds input rate
Average input rate during the last 300 seconds:
• bytes/sec—Average number of received bytes per second.
• bits/sec—Average number of received bits per second.
• packets/sec—Average number of received packets per second.
Last 300 seconds output rate
Average output rate over the last 300 seconds:
• bytes/sec—Average number of sent bytes per second.
• bits/sec—Average number of sent bits per second.
• packets/sec—Average number of sent packets per second.