R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

237
eth-channel
Use eth-channel to channelize a cellular interface into an Eth-channel interface.
Use undo eth-channel to remove the Eth-channel interface channelized from a cellular interface.
Syntax
eth-channel channel-number
undo eth-channel channel-number
Views
Cellular interface view
Predefined user roles
network-admin
Parameters
channel-number: Specifies an Eth-channel interface by its number. The value is 0.
Usage guidelines
This command names the Eth-channel interface channelized from a cellular interface as eth-channel
cellular-number:channel-number.
Examples
# Channelize Cellular 2/0/0 into an Eth-channel interface.
<Sysname> system-view
[Sysname] controller cellular 2/0/0
[Sysname-Cellular2/0/0] eth-channel 0
interface eth-channel
Use interface eth-channel to enter Eth-channel interface view.
Syntax
interface eth-channel interface-number
Views
System view
Predefined user roles
network-admin
Parameters
interface-number: Specifies an Eth-channel interface by its number.
Examples
# Enter Eth-channel 2/0/0:0 interface view.
<Sysname> system-view
[Sysname] interface eth-channel 2/0/0:0
[Sysname-Eth-channel2/0/0:0]