R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

248
Related commands
• dialer circular enable
• dialer priority
• interface dialer
dialer disconnect
Use dialer disconnect to disconnect the dialup link on an interface.
Syntax
dialer disconnect [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If no interface is
specified, this command disconnects dialup links on all interfaces.
Examples
# Disconnect the dialup link on interface Dialer 0.
<Sysname> dialer disconnect interface dialer0
dialer flow-interval
Use dialer flow-interval to set the interval for DDR to collect traffic statistics.
Use undo dialer flow-interval to restore the default.
Syntax
dialer flow-interval interval
undo dialer flow-interval
Default
The interval for DDR to collect traffic statistics is 20 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
interval: Specifies the interval for DDR to collect traffic statistics, in the range of 1 to 1500 seconds.
Usage guidelines
DDR provides traffic statistics for dialup links at the user-configured interval.