R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

250
dialer peer-name
Use dialer peer-name to configure the remote username in bundle DDR for PPP authentication when
receiving calls.
Use undo dialer peer-name to remove the configured remote username.
Syntax
dialer peer-name username
undo dialer peer-name [ username ]
Default
No remote username is configured.
Views
Dialer interface view
Predefined user roles
network-admin
Parameters
username: Specifies the remote username for PPP authentication, a case-insensitive string of 1 to 80
characters.
Usage guidelines
The device checks the remote username obtained in PPP authentication against the remote usernames
configured by this command to determine which dialer interface receives which call.
This command is effective only on bundle DDR dialer interfaces. You can configure a maximum number
of 255 remote usernames for a dialer interface. This enables one dialer interface to receive calls from
multiple physical interfaces.
If a bundle DDR dialer interface is not configured with any remote username, this interface can place
calls but cannot receive calls.
Examples
# Set the remote username for interface Dialer 1 to routerb.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] dialer peer-name routerb
dialer priority
Use dialer priority to assign a priority to a physical interface in a dialer circular group.
Use undo dialer priority to restore the default.
Syntax
dialer priority priority
undo dialer priority
Default
The priority of a physical interface in a dialer circular group is 1.