R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

262
Parameters
interface-number: Existing dialer interface number.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
description: Displays the complete interface description. If you do not specify this keyword, the command
displays only the first 27 characters of a description if the description contains more than 27 characters.
down: Displays information about interfaces in physically Down state and the causes. If you do not
specify this keyword, the command displays information about interfaces in all states.
Usage guidelines
If you do not specify the dialer keyword, this command displays information about all interfaces on the
device.
If you specify the dialer keyword without the interface-number argument, this command displays
information about all the dialer interfaces.
Examples
# Display detailed information about interface Dialer 1.
<Sysname> display interface dialer 1
Dialer1
Current state: UP
Line protocol state: UP (spoofing)
Description: Dialer1 Interface
Bandwidth: 64kbps
Maximum Transmit Unit: 1500
Hold timer: 10 seconds
Internet protocol processing: disabled
Link layer protocol: PPP
LCP: initial
Physical: Dialer, baudrate: 64000 bps
Output queue - Urgent queuing: Size/Length/Discards 0/100/0
Output queue - Protocol queuing: Size/Length/Discards 0/500/0
Output queue - FIFO queuing: Size/Length/Discards 0/75/0
Last clearing of counters: Never
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Input: 0 packets, 0 bytes, 0 dropped
Output: 0 packets, 0 bytes, 0 dropped
# Display brief information about interface Dialer 1.
<Sysname> display interface dialer 1 brief
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
Dia1 UP UP(s) --
# Display brief information about all dialer interfaces in physically Down state.
<Sysname> display interface dialer brief down
Brief information on interface(s) under route mode: