R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

264
Field Descri
p
tion
Interface Abbreviated interface name.
Link
Physical link state of the interface:
• UP—The interface is up.
• ADM—The interface has been administratively shut down. To bring up
the interface, execute the undo shutdown command.
• Stby—The interface is operating as a standby interface.
Protocol
Data link layer protocol state of the dialer interface:
• UP.
• DOWN.
• UP(s)—The interface is up, but its link is an on-demand link or not
present at all.
Main IP Main IP address of the interface.
Description Description of the interface.
Cause
Reason why a physical link is down. If the port has been shut down by using
the shutdown command, this field displays Administratively. To restore the
physical state of the interface, use the undo shutdown command.
Related commands
reset counters interface
interface dialer
Use interface dialer to create a dialer interface. If the dialer interface already exists, you enter the dialer
interface view.
Use undo interface dialer to remove a dialer interface.
Syntax
interface dialer number
undo interface dialer number
Default
No dialer interface is created.
Views
System view
Predefined user roles
network-admin
Parameters
number: Specifies the number of the dialer interface, in the range of 0 to 1023.
Usage guidelines
The dialer interface has a fixed baud rate of 64000 bps.
Examples
# Create dialer interface Dialer 1.