R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

268
If you do not specify a card to forward the traffic of a dialer interface, the system automatically chooses
the MPU to forward the traffic. To reduce the load on the MPU, HP recommends that you use this
command to specify cards to forward traffic of dialer interfaces.
Examples
# Specify the card in slot 2 to forward the traffic of Dialer1.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] service slot 2
shutdown
Use shutdown to shut down a dialer interface.
Use undo shutdown to bring up a dialer interface.
Syntax
shutdown
undo shutdown
Default
A dialer interface is up.
Views
Dialer interface view
Predefined user roles
network-admin
Examples
# Shut down interface Dialer 1.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] shutdown
standby routing-group
Use standby routing-group to enable the dynamic route backup function on a backup interface.
Use undo standby routing-group to disable the dynamic route backup function.
Syntax
standby routing-group group-number
undo standby routing-group group-number
Default
The dynamic route backup function is disabled.
Views
Dialup interface view
Predefined user roles
network-admin