R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

22
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth of an interface affects the link costs in OSPF, OSPFv3, and IS-IS. For more
information, see Layer 3—IP Routing Configuration Guide.
Examples
# Set the expected bandwidth of interface Virtual-Template 10 to 1000 kbps.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10] bandwidth 1000
# Set the expected bandwidth of MP-group interface 3 to 1000 kbps.
<Sysname> system-view
[Sysname] interface mp-group 3
[Sysname-MP-group3] bandwidth 1000
default
Use default to restore the default settings for a VT or MP-group interface.
Syntax
default
Views
VT interface view, MP-group interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command before using it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies or system restrictions. Use the display this command in interface view to identify these
commands. Use the undo forms of these commands or follow the command reference to individually
restore their default settings. If your restoration attempt still fails, follow the error message instructions to
resolve the problem.
Examples
# Restore the default settings of interface Virtual-Template 10.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10] default
# Restore the default settings of interface MP-group 3.