R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

Parameters

interface-number: Specifies an existing MP-group interface by its number.

brief: Displays brief interface information. If you do not specify this keyword, the command displays

detailed interface information.

description: Displays complete interface description. If this keyword is not specified, the command

displays only the first 27 characters of the interface description if the description contains more than 27

characters.

down: Displays information about interfaces in physically down state and the causes. If you do not

specify this keyword, the command displays information about all interfaces.

Usage guidelines

If you do not specify the mp-group keyword, the command displays information about all interfaces on

the device.

If you specify the mp-group keyword without the interface-number argument, the command displays

information about all existing MP-group interfaces.

Examples

# Display detailed information about interface MP-group 12.

<Sysname> display interface mp-group 12

MP-group12

Current state: DOWN

Line protocol state: DOWN

Description: MP-group12 Interface

Bandwidth: 2048kbps

Maximum Transmit Unit: 1500

Hold timer: 10 seconds

Internet protocol processing: disabled

Link layer protocol: PPP

LCP: initial

Physical: MP, baudrate: 2048000 bps

Output queue - Urgent queuing: Size/Length/Discards 0/100/0

Output queue - Protocol queuing: Size/Length/Discards 0/500/0

Output queue - FIFO queuing: Size/Length/Discards 0/75/0

Last clearing of counters: Never

Last 300 seconds input rate: 0 bytes/sec, 0 packets/sec

Last 300 seconds output rate: 0 bytes/sec, 0 packets/sec

Input: 0 packets, 0 bytes, 0 droped

Output: 0 packets, 0 bytes, 0 droped

# Display brief information about interface MP-group12.

<Sysname> display interface mp-group 12 brief

Brief information on interface(s) under route mode:

Link: ADM - administratively down; Stby - standby

Protocol: (s) - spoofing

Interface Link Protocol Main IP Description

MP12 DOWN DOWN --

# Display brief information about the MP-group interfaces in physically down state and the causes.

<Sysname> display interface mp-group brief down