R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

33
interface mp-group
Use interface mp-group to create an MP-group interface and enter its view. If the MP-group interface
already exists, you enter its view directly.
Use undo interface mp-group to remove an MP-group interface.
Syntax
interface mp-group mp-number
undo interface mp-group mp-number
Default
No MP-group interface is created.
Views
System view
Predefined user roles
network-admin
Parameters
mp-number: Specifies an MP-group interface by its number in the range of 0 to 1023.
Usage guidelines
You must use the interface mp-group command together with the ppp mp mp-group command. You can
execute the two commands in either order.
Examples
# Create interface MP-group 3.
<Sysname> system-view
[Sysname] interface mp-group 3
[Sysname-MP-group3]
interface virtual-template
Use interface virtual-template to create a VT interface and enter its view. If the VT interface already exists,
you enter its view directly.
Use undo interface virtual-template to remove a VT interface.
Syntax
interface virtual-template number
undo interface virtual-template number
Default
No VT interface is created.
Views
System view
Predefined user roles
network-admin