R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

38
ppp mp lfi delay-per-frag
Use ppp mp lfi delay-per-frag to set the maximum LFI fragment transmission delay.
Use undo ppp mp lfi delay-per-frag to restore the default.
Syntax
ppp mp lfi delay-per-frag time
undo ppp mp lfi delay-per-frag
Default
The maximum LFI fragment transmission delay is 10 ms.
Views
VT interface view, dialer interface view, MP-group interface view
Predefined user roles
network-admin
Parameters
time: Specifies the maximum LFI fragment transmission delay, in the range of 1 to 1000 ms.
Examples
# Set the maximum LFI fragment transmission delay to 20 ms on interface MP-group 1.
<Sysname> system-view
[Sysname] interface mp-group 1
[Sysname-MP-group1] ppp mp lfi delay-per-frag 20
Related commands
• ppp mp lfi enable
• ppp mp lfi size-per-frag
ppp mp lfi enable
Use ppp mp lfi enable to enable LFI on an interface.
Use undo ppp mp lfi to restore the default.
Syntax
ppp mp lfi enable
undo ppp mp lfi enable
Default
LFI is disabled.
Views
VT interface view, dialer interface view, MP-group interface view
Predefined user roles
network-admin