R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

40
ppp mp max-bind
Use ppp mp max-bind to set the maximum number of links in an MP bundle.
Use undo ppp mp max-bind to restore the default.
Syntax
ppp mp max-bind max-bind-num
undo ppp mp max-bind
Default
The maximum number of links in an MP bundle is 16.
Views
VT interface view, dialer interface view, MP-group interface view
Predefined user roles
network-admin
Parameters
max-bind-num: Specifies the maximum number of links in an MP bundle, in the range of 1 to 128.
Usage guidelines
IMPORTANT:
Use the default settin
g
in most situations. Inappropriate use of this command can cause PPP performance
de
g
radation. Make sure you understand the impact of this command on your network before you use it.
Configure the maximum number of links in an MP bundle to be greater than the actual number of bound
links. Otherwise, MP binding fails.
The maximum number of links configured for an MP bundle immediately takes effect. If the new maximum
number is smaller than the number of existing links, the existing links are not affected.
Examples
# Set the maximum number of links in an MP bundle to 12.
<Sysname> system-view
[Sysname] interface mp-group 1
[Sysname-MP-group1] ppp mp max-bind 12
ppp mp min-bind
Use ppp mp min-bind to set the minimum number of links in an MP bundle.
Use undo ppp mp min-bind to restore the default.
Syntax
ppp mp min-bind min-bind-num
undo ppp mp min-bind
Default
The minimum number of PPP links in an MP bundle is 0, which means that MP dial-up relies on traffic
detection.