R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

45
[Sysname] interface mp-group 1
[Sysname-MP-group1] ppp mp timer lost-fragment 20
ppp mp user
Use ppp mp user to associate a username with a VT interface.
Use undo ppp mp user to remove the association.
Syntax
ppp mp user username bind virtual-template number
undo ppp mp user username
Default
No username is bound to a VT interface.
Views
System view
Predefined user roles
network-admin
Parameters
username: Specifies a username, a case-sensitive string of 1 to 80 characters.
bind virtual-template number: Specifies a VT interface by its number in the range of 0 to 1023.
Usage guidelines
This command associates a username with a VT interface. After the user passes authentication, the
system uses the settings on the VT interface to create an MP bundle and a VA interface to transmit data.
You can configure the following parameters for a VT interface:
• Local IP address and the peer IP address (or IP address pool).
• ppp mp-commands.
Examples
# Associate username user 1 with interface Virtual-Template 1, and set the IP address of the VT interface
to 202.38.60.1/24.
<Sysname> system-view
[Sysname] ppp mp user user1 bind virtual-template 1
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ip address 202.38.60.1 255.255.255.0
Related commands
ppp mp
ppp mp virtual-template
Use ppp mp virtual-template to bind an interface to a VT interface, and enable MP for the interface.
Use undo ppp mp to restore the default.
Syntax
ppp mp virtual-template number