R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

46
undo ppp mp
Default
The interface is enabled with PPP.
Views
Interface view
Predefined user roles
network-admin
Parameters
number: Specifies a VT interface by its number.
The following matrix shows the value ranges for the number argument:
Hardware Value ran
g
e
MSR2000 0 to 1023
MSR3000 0 to 2047
MSR4000 0 to 4095
Usage guidelines
After you bind an interface to a VT interface, you c an op tionally en able PA P, C HA P, MS -CHAP, or
MS-CHAP-V2 authentication.
The interfaces bound to the same VT interface are bound together. The ppp mp virtual-template
command and the ppp mp command are mutually exclusive.
Examples
# Bind interface Serial 2/1/0 to interface Virtual-Template 1, and enable MP for Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] ppp mp virtual-template 1
Related commands
ppp mp
reset counters interface mp-group
Use reset counters interface mp-group to clear statistics on MP-group interfaces.
Syntax
reset counters interface [ mp-group [ interface-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
mp-group: Clears traffic statistics on MP-group interfaces.