R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

50
PPPoE commands
PPPoE server commands
display pppoe-server session packet
Use display pppoe-server session packet to display packet statistics for PPPoE sessions.
Syntax
MSR2000/MSR3000:
display pppoe-server session packet [ interface interface-type interface-number ]
MSR4000:
display pppoe-server session packet [ slot slot-number | interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify this option, the command displays packet statistics for PPPoE sessions on all interfaces.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays packet statistics for PPPoE sessions on all cards. (MSR4000.)
Examples
# Display packet statistics for PPPoE sessions on GigabitEthernet 1/0/1.
<Sysname> display pppoe-server session packet interface gigabitethernet 1/0/1
Total 2 PPPoE sessions:
Ethernet interface: GE1/0/1 Session ID: 1
InPackets: 37 OutPackets: 38
InBytes: 390 OutBytes: 406
InDrops: 0 OutDrops: 0
Ethernet interface: GE1/0/1 Session ID: 2
InPackets: 67 OutPackets: 48
InBytes: 490 OutBytes: 806
InDrops: 1 OutDrops: 2