R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

52
Service VLAN: N/A Customer VLAN: N/A
Ethernet interface: GE1/0/1 Session ID: 2
PPP interface: VA2 State: OPEN
Remote MAC:00e0-1600-7200 Local MAC: 00e0-1400-7400
Service VLAN: 2 Customer VLAN: 155
Table 8 Command output
Field Descri
p
tion
Ethernet interface Interface where the PPPoE session is present.
Session ID PPPoE session ID.
PPP interface Virtual access interface created for the PPPoE session.
State
PPPoE session state:
• PADR RCVD—The PPPoE session is being negotiated.
• Open—The PPPoE session has been successfully
established.
RemoteMAC MAC address of the remote end.
LocalMAC MAC address of the local end.
Service VLAN
ISP VLAN.
N/A means no ISP VLAN is available.
Customer VLAN
Customer VLAN.
N/A means no customer VLAN is available.
display pppoe-server throttled-mac
Use display pppoe-server throttled-mac to display information about blocked users.
Syntax
MSR2000/MSR3000:
display pppoe-server throttled-mac [ interface interface-type interface-number ]
MSR4000:
display pppoe-server throttled-mac { slot slot-number | interface interface-type interface-number }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. For MSR2000
or MSR3000, if you do not specify this option, the command displays information about blocked users
on all interfaces.
slot slot-number: Specifies a card by its slot number. (MSR4000.)