R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

54
Table 10 Command output
Field Descri
p
tion
Location
The card and CPU where the VA pool resides.
This field is not available for MSR2000 or MSR3000.
When the field displays two hyphens (- -), it indicates a
global VA pool.
If the device cannot display the CPU, an asterisks (*) is
displayed, for example, 0/*.
Virtual template VT interface that uses the VA pool.
Request VA pool capacity requested by the user.
Free/State
VA pool capacity available for the user/current state of
the VA pool.
• CREATING—The VA pool is being created.
• DESTROYING—The VA pool is being removed.
Related commands
pppoe-server virtual-template va-pool
pppoe-server access-line-id bas-info
Use pppoe-server access-line-id bas-info to configure the access line ID to automatically include BAS
information.
Use undo pppoe-server access-line-id bas-info to restore the default.
Syntax
pppoe-server access-line-id bas-info
undo pppoe-server access-line-id bas-info
Default
The access line ID does not include BAS information automatically.
Views
Layer 3 Ethernet interface view
Layer 3 virtual Ethernet interface view
Layer 3 aggregate interface view
Predefined user roles
network-admin
Usage guidelines
The access line ID includes circuit-id and remote-id.
In trust mode, the PPPoE server processes the parsed circuit-id and remote-id in a packet as follows:
• If pppoe-server access-line-id bas-info is configured, the PPPoE server examines whether the
circuit-id contains BAS information. If it does, the PPPoE server directly delivers the circuit-id and
remote-id to the RADIUS server. If the circuit-id does not contain BAS information, the PPPoE server