R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

63
• The maximum number of PPPoE sessions on a card. (MSR4000.)
• The maximum number of PPPoE sessions on a device. (MSR2000/MSR3000.)
New maximum number settings only apply to subsequently established PPPoE sessions.
Examples
# Set the maximum number of PPPoE sessions for a user on GigabitEthernet 1/0/1 to 50.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] pppoe-server session-limit per-mac 50
Related commands
• pppoe-server session-limit
• pppoe-server session-limit per-vlan
• pppoe-server session-limit total
pppoe-server session-limit per-vlan
Use pppoe-server session-limit per-vlan to set the maximum number of PPPoE sessions for a VLAN on an
interface.
Use undo pppoe-server session-limit per-vlan to restore the default.
Syntax
pppoe-server session-limit per-vlan number
undo pppoe-server session-limit per-vlan
Default
The number of PPPoE sessions for a VLAN on an interface is not limited.
Views
Layer 3 Ethernet interface view
Layer 3 virtual Ethernet interface view
Layer 3 aggregate interface view
Predefined user roles
network-admin
Parameters
number: Specifies the maximum number of PPPoE sessions for a VLAN, in the range of 1 to 65534.
Usage guidelines
PPPoE can establish a session when none of the following maximum numbers are reached:
• The maximum number of PPPoE sessions for a user on an interface.
• The maximum number of PPPoE sessions for a VLAN on an interface.
• The maximum number of PPPoE sessions on an interface.
• The maximum number of PPPoE sessions on a card. (MSR4000.)
• The maximum number of PPPoE sessions on a device. (MSR2000/MSR3000.)
New maximum number settings only apply to subsequently established PPPoE sessions.