R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

64
Examples
# Set the maximum number of PPPoE sessions for a VLAN on GigabitEthernet 1/0/1 to 50.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] pppoe-server session-limit per-vlan 50
Related commands
• pppoe-server sessions limit
• pppoe-server sessions limit per-mac
• pppoe-server sessions limit total
pppoe-server session-limit total
Use pppoe-server session-limit total to set the maximum number of PPPoE sessions on a device.
Use undo pppoe-server session-limit total to restore the default.
Syntax
MSR2000/MSR3000:
pppoe-server session-limit total number
undo pppoe-server session-limit total
MSR4000:
pppoe-server session-limit slot slot-number total number
undo pppoe-server session-limit slot slot-number total
Default
For MSR2000/MSR3000, the number of PPPoE sessions on a device is not limited.
For MSR4000, the number of PPPoE sessions on a card is not limited.
Views
System view
Predefined user roles
network-admin
Parameters
number: Specifies the maximum number of PPPoE sessions on a device, in the range of 1 to 65534.
(MSR2000/MSR3000.)
slot slot-number total number: Specifies a card by its slot number in the range of 1 to 65534.
(MSR4000.)
Usage guidelines
PPPoE can establish a session when none of the following maximum numbers are reached:
• The maximum number of PPPoE sessions for a user on an interface.
• The maximum number of PPPoE sessions for a VLAN on an interface.
• The maximum number of PPPoE sessions on an interface.
• The maximum number of PPPoE sessions on a card. (MSR4000.)