R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

65
• The maximum number of PPPoE sessions on a device. (MSR2000/MSR3000.)
The maximum number of PPPoE sessions on a device or on a card is also limited by the device
specification. If the configured number is larger than the device specification, the device specification
applies.
New maximum number settings only apply to subsequently established PPPoE sessions.
Examples
# (MSR2000/MSR3000.) Set the maximum number of PPPoE sessions on a device to 3000.
<Sysname> system-view
[Sysname] pppoe-server session-limit total 3000
# (MSR4000.) Set the maximum number of PPPoE sessions on card 3 to 1500.
<Sysname> system-view
[Sysname] pppoe-server session-limit slot 3 total 1500
Related commands
• pppoe-server session-limit
• pppoe-server session-limit per-mac
• pppoe-server session-limit per-vlan
pppoe-server tag ac-name
Use pppoe-server tag ac-name to configure the access concentrator (AC) name for the PPPoE server.
Use undo pppoe-server tag ac-name to restore the default.
Syntax
pppoe-server tag ac-name name
undo pppoe-server tag ac-name
Default
The AC name for the PPPoE server is the device name.
Views
Layer 3 Ethernet interface view
Layer 3 virtual Ethernet interface view
Layer 3 aggregate interface view
Predefined user roles
network-admin
Parameters
name: Specifies an AC name, a case-sensitive string of 1 to 64 characters.
Usage guidelines
The PPPoE server sends the AC name in PADO packets. PPPoE clients choose a PPPoE server by AC name.
The PPPoE client on HP devices cannot identify PPPoE servers by AC name.
The device does not support an AC name comprised of all blanks.