R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

74
Parameters
all: Resets all the PPPoE sessions.
dial-bundle-number number: Specifies a dialer bundle by its number in the range of 0 to 1023.
Usage guidelines
A PPPoE session in permanent mode and terminated by this command will be established again when
the auto dial timer expires.
A PPPoE session in on-demand mode and terminated by this command will be established again only
when there is a need for data transmission.
Examples
# Reset all PPPoE sessions.
<Sysname> reset pppoe-client all
Related commands
dialer timer autodial (DDR commands)
reset pppoe-client session packet
Use reset pppoe-client session packet to reset the protocol packet statistics for a PPPoE session.
Syntax
reset pppoe-client session packet [ dial-bundle-number number ]
Views
User view
Predefined user roles
network-admin
Parameters
dial-bundle-number number: Specifies the dialer bundle number corresponding to a PPPoE session, in
the range of 0 to 1023. If this option is not specified, the command resets the protocol packet statistics for
all PPPoE sessions.
Examples
# Reset the protocol packet statistics for all PPPoE sessions.
<Sysname> reset pppoe-client session packet
Related commands
display pppoe-client session packet