R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

77
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth of an interface affects the link costs in OSPF, OSPFv3, and IS-IS. For more
information, see Layer 3—IP Routing Configuration Guide.
Examples
# Set the expected bandwidth of virtual PPP interface 10 to 100 kbps.
<Sysname> system-view
[Sysname] interface virtual-ppp 10
[Sysname-Virtual-PPP10] bandwidth 100
default
Use default to restore the default settings for a virtual PPP interface.
Syntax
default
Views
Virtual PPP interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you execute it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies or system restrictions. Use the display this command in interface view to identify these
commands. Use the undo forms of these commands or follow the command reference to individually
restore their default settings. If your restoration attempt still fails, follow the error message instructions to
resolve the problem.
Examples
# Restore the default settings for Virtual-PPP 10.
<Sysname> system-view
[Sysname] interface virtual-ppp 10
[Sysname-Virtual-PPP10] default
description
Use description to configure the description for a virtual PPP interface.
Use undo description to restore the default.
Syntax
description text