R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

80
Field Descri
p
tion
Input: 154 packets, 1880 bytes, 0 drops
Total number of inbound packets, total number of inbound bytes,
and total number of dropped inbound packets.
Output: 155 packets, 1875 bytes, 0 drops
Total number of outbound packets, total number of outbound
bytes, and total number of dropped outbound packets.
# Display summary information about virtual PPP interface Virtual-PPP 10.
<Sysname> display interface virtual-ppp 10 brief
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
VPPP10 ADM DOWN 10.0.0.1 Virtual-PPP10 Interface
# Display information about the virtual PPP interfaces in physically down state and the causes.
<Sysname> display interface virtual-ppp brief down
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
VPPP9 ADM Administratively
VPPP10 ADM Administratively
VPPP12 ADM Administratively
# Display summary information about virtual PPP interface Virtual-PPP 10, including the entire interface
description.
<Sysname> display inter Virtual-PPP 10 brief description
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
VPPP10 ADM DOWN 10.0.0.1 Virtual-PPP10 Interface
aaaaaaaaaaaaaaaa
Table 14 Command output
Field Descri
p
tion
The brief information of
interface(s) under route
mode/Brief information on
interface(s) under route mode
Summary information about Layer 3 interfaces.
Link: ADM - administratively
down; Stby - standby
• ADM—The interface has been shut down by the network administrator.
To recover its physical layer state, execute the undo shutdown
command.
• Stby—The interface is a backup interface. To see the primary interface,
use the display interface-backup state command described in High
Availability Command Reference.
Protocol: (s) - spoofing
The link layer protocol of an interface is UP, but its link is an on-demand
link or not present at all.
The protocol state of null or loopback interfaces might include the
spoofing flag.