R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

83
Field Descri
p
tion
RemoteTID Remote tunnel ID.
State
Tunnel state:
• Idle.
• Wait-reply.
• Wait-connect.
• Established.
• Stopping.
Sessions Number of sessions within the tunnel.
RemoteAddress IP address of the peer.
RemotePort UDP port number of the peer.
RemoteName Name of the tunnel peer.
Related commands
reset l2tp tunnel
interface virtual-ppp
Use interface virtual-ppp to create a virtual PPP interface and enter its view. If the interface has been
created, you directly enter its view.
Use undo interface virtual-ppp to remove a virtual PPP interface.
Syntax
interface virtual-ppp interface-number
undo interface virtual-ppp interface-number
Default
No virtual PPP interface exists.
Views
System view
Predefined user roles
network-admin
Parameters
interface-number: Specifies a virtual PPP interface by its number in the range of 0 to 255.
Usage guidelines
A virtual PPP interface is required on the LAC for establishing an LAC-auto-initiated L2TP tunnel.
Examples
# Create virtual PPP interface Virtual-PPP 10 and enter its view.
<Sysname> system-view
[Sysname] interface virtual-ppp 10
[Sysname-Virtual-PPP10]