R0106-HP MSR Router Series Layer 2 - WAN Configuration Guide(V7)

125
Ste
p
Command Remarks
5. Create a traffic behavior and
enter its view.
traffic behavior behavior-name
By default, no traffic
behavior is created.
6. Re-mark the CLP flag value of
ATM cells.
remark atm-clp atm-clp-value
By default, the CLP flag
value of ATM cells is not
re-marked.
The CLP flag value of ATM
cells is 0 or 1. The cells
with a CLP flag value of 1
are dropped first when
network congestion
occurs.
7. Return to system view.
quit N/A
8. Create a QoS policy and enter its
view.
qos policy policy-name N/A
9. Associate a traffic class with a
traffic behavior in the QoS
policy.
classifier classifier-name behavior
behavior-name [ mode dcbx ]
By default, a traffic class is
not associated with a
traffic behavior.
10. Return to system view.
quit N/A
11. Enter ATM interface view or ATM
subinterface view.
interface atm { interface-number |
interface-number.subnumber }
N/A
12. Enter PVC view or PVC view in
PVC-group.
• Enter PVC view:
pvc { pvc-name [ vpi/vci ] | vpi/vci }
• Enter PVC view in PVC-group:
a. pvc-group group-number
b. pvc { pvc-name [ vpi/vci ] |
vpi/vci }
N/A
13. Apply the QoS policy to the PVC.
qos apply policy policy-name outbound
By default, no QoS policy
is applied to the PVC.
NOTE:
For more information about traffic class, traffic behavior, and QoS policy, see
ACL and QoS
Configuration Guide
.
Configuring ATM OAM functions
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter ATM interface view
or ATM subinterface view.
interface atm { interface-number |
interface-number.subnumber }
N/A