R0106-HP MSR Router Series Layer 2 - WAN Configuration Guide(V7)

Maximum Transmit Unit: 1500

Hold timer: 10 seconds

Internet Address is 8.1.1.2/24 Primary

Link layer protocol: PPP

LCP: opened, MP: opened, IPCP: opened

Physical: MP, baudrate: 64000 bps

Main interface: Virtual-Template1

Output queue - Urgent queuing: Size/Length/Discards 0/100/0

Output queue - Protocol queuing: Size/Length/Discards 0/500/0

Output queue - FIFO queuing: Size/Length/Discards 0/75/0

Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec

Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec

Input: 2 packets, 80 bytes, 0 drops

Output: 2 packets, 24 bytes, 0 drops

# Ping IP address 8.1.1.1 on Router B.

[RouterB] ping 8.1.1.1

Ping 8.1.1.1 (8.1.1.1): 56 data bytes, press CTRL_C to break

56 bytes from 8.1.1.1: icmp_seq=0 ttl=255 time=0.000 ms

56 bytes from 8.1.1.1: icmp_seq=1 ttl=255 time=0.000 ms

56 bytes from 8.1.1.1: icmp_seq=2 ttl=255 time=1.000 ms

56 bytes from 8.1.1.1: icmp_seq=3 ttl=255 time=1.000 ms

56 bytes from 8.1.1.1: icmp_seq=4 ttl=255 time=0.000 ms

--- Ping statistics for 8.1.1.1 ---

5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss

round-trip min/avg/max/std-dev = 0.000/0.400/1.000/0.490 ms

(Method 3) Configure an MP-group interface.

8. Configure Router A:

# Create an MP-group interface, and configure an IP address for it.

<RouterA> system-view

[RouterA] interface mp-group 1

[RouterA-MP-group1] ip address 1.1.1.1 24

# Configure interface Serial 2/1/1.

[RouterA-MP-group1] quit

[RouterA] interface serial 2/1/1

[RouterA-Serial2/1/1] link-protocol ppp

[RouterA-Serial2/1/1] ppp mp mp-group 1

[RouterA-Serial2/1/1] shutdown

[RouterA-Serial2/1/1] undo shutdown

[RouterA-Serial2/1/1] quit

# Configure interface Serial 2/1/0.

[RouterA] interface serial 2/1/0

[RouterA-Serial2/1/0] link-protocol ppp

[RouterA-Serial2/1/0] ppp mp mp-group 1

[RouterA-Serial2/1/0] shutdown

[RouterA-Serial2/1/0] undo shutdown

[RouterA-Serial2/1/0] quit