R0106-HP MSR Router Series Layer 2 - WAN Configuration Guide(V7)
42
Ste
p
Command
Remarks
10. Configure the PPPoE server to
perform authentication and
accounting for PPP users.
See Security Configuration Guide.
N/A
Setting the maximum number of PPPoE sessions
PPPoE can establish a session when none of the following maximum numbers are reached:
• The maximum number of PPPoE sessions for a user on an interface.
• The maximum number of PPPoE sessions for a VLAN on an interface.
• The maximum number of PPPoE sessions on an interface.
• The maximum number of PPPoE sessions on a card. (MSR4000.)
• The maximum number of PPPoE sessions on an IRF member device. (MSR2000/MSR3000.)
• The maximum number of PPPoE sessions on a device. (Centralized devices.)
New maximum number settings only apply to subsequently established PPPoE sessions.
To configure the maximum number of PPPoE sessions:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter Layer 3 Ethernet interface,
Layer 3 virtual Ethernet
interface, or Layer 3 aggregate
interface view.
interface interface-type
interface-number
The PPPoE server is enabled on
the interface.
3. Configure the maximum
number of PPPoE sessions on an
interface.
pppoe-server session-limit number
By default, the number of PPPoE
sessions on an interface is not
limited.
4. Configure the maximum
number of PPPoE sessions for a
VLAN on an interface.
pppoe-server session-limit
per-vlan number
By default, the number of PPPoE
sessions for a VLAN on an
interface is not limited.
5. Configure the maximum
number of PPPoE sessions for a
user on an interface.
pppoe-server session-limit per-mac
number
By default, a use is allowed to
create only one PPPoE session.
6. Return to system view.
quit N/A
7. Configure the maximum
number of PPPoE sessions on a
device (MSR2000/MSR3000).
pppoe-server session-limit total
number
By default, the number of PPPoE
sessions on a device is not limited.
8. Configure the maximum
number of PPPoE sessions on the
specified card (MSR4000).
pppoe-server session-limit slot
slot-number total number
By default, the number of PPPoE
sessions on a card is not limited.
Limiting the PPPoE access rate
The device can limit the rate at which a user (identified by an MAC address) can create PPPoE sessions
on an interface. If the number of PPPoE requests within the monitoring time exceeds the configured