R0106-HP MSR Router Series Layer 2 - WAN Configuration Guide(V7)

87
Configuration procedure
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Create an HDLC link bundle
interface and enter its view.
interface hdlc-bundle bundle-id
By default, no HDLC link bundle
interface exists.
3. Configure the load balancing
mode.
bundle load-balance { per-flow |
per-packet }
By default, per-packet load
balancing applies.
4. (Optional.) Specify a card to
forward traffic for the HDLC
link bundle interface.
(MSR4000.)
service slot slot-number
By default, no card is specified to
forward traffic for the HDLC link
bundle interface.
5. (Optional.) Set the minimum
number of Selected interfaces
required for bringing up the
HDLC link bundle.
bundle min-active links number
By default, the minimum number of
Selected interfaces required for
bringing up an HDLC link bundle is
not set.
6. (Optional.) Set the maximum
number of Selected interfaces
allowed in the HDLC link
bundle.
bundle max-active links number
The default setting is the maximum
number of Selected interfaces
supported.
7. (Optional.) Set the minimum
bandwidth required for
bringing up the HDLC link
bundle.
bundle min-active bandwidth
bandwidth
By default, the minimum bandwidth
required for bringing up an HDLC
link bundle is not set.
8. (Optional.) Set the expected
bandwidth for the HDLC link
bundle interface.
bandwidth bandwidth-value
By default, the expected bandwidth
(in kbps) is the interface baud rate
divided by 1000.
9. (Optional.) Configure a
description for the HDLC link
bundle interface.
description text
By default, the description of an
HDLC link bundle interface is the
interface name followed by the
Interface string.
10. (Optional.) Set the MTU size
for the HDLC link bundle
interface.
mtu size
The default setting is 1500 bytes.
The MTU size affects the
fragmentation and reassembly of IP
packets. Use this command to set a
proper MTU size according to your
network conditions.
11. (Optional.) Restore the default
settings for the HDLC link
bundle interface.
default N/A