R0106-HP MSR Router Series Layer 2 - WAN Configuration Guide(V7)

89
Ste
p
Command Remarks
5. Set the bundling priority for the
member interface.
bundle member-priority priority The default setting is 32768.
Displaying and maintaining HDLC link bundling
Execute display commands in any view and reset commands in user view.
Task Command
Display information about an
HDLC link bundle
(MSR2000/MSR3000).
display bundle hdlc-bundle [ bundle-id ]
Display information about an
HDLC link bundle (MSR4000).
display bundle hdlc-bundle [ bundle-id ] slot slot-number
Display information about an
HDLC link bundle interface.
display interface [ hdlc-bundle [ bundle-id ] ] [ brief [ description | down ] ]
Clear statistics for an HDLC link
bundle interface.
reset counters interface [ hdlc-bundle [ bundle-id ] ]
HDLC link bundling configuration example
Network requirements
As shown in Figure 30, to increase bandwidth and enhance connection reliability between Router A and
Router B, create an HDLC link bundle.
Figure 30 Network diagram
Configuration procedure
Configuring Router A
# Create HDLC link bundle interface 1 and assign an IP address to it.
<RouterA> system-view
[RouterA] interface hdlc-bundle 1
[RouterA-HDLC-bundle1] ip address 1.1.1.1 24
[RouterA-HDLC-bundle1] quit