R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

91
[Sysname-rip-100] undo validate-source-address
version
Use version to specify a global RIP version.
Use undo version to restore the default.
Syntax
version { 1 | 2 }
undo version
Default
No global RIP version is configured. An RIP interface can send RIPv1 broadcasts and receive RIPv1
broadcasts and unicasts, and RIPv2 broadcasts, multicasts, and unicasts.
Views
RIP view
Predefined user roles
network-admin
Parameters
1: Specifies the RIP version as RIPv1.
2: Specifies the RIP version as RIPv2. RIPv2 messages are multicast.
Usage guidelines
An interface prefers the RIP version configured on it over the global RIP version. If no RIP version is
specified for the interface and the global version is RIPv1, the interface uses RIPv1. It can send RIPv1
broadcasts and receive RIPv1 broadcasts and unicasts. If no RIP version is specified for the interface and
the global version is RIPv2, the interface uses RIPv2 multicast mode, and it can send RIPv2 multicasts, and
receive RIPv2 broadcasts, multicasts, and unicasts.
Examples
# Specify the global RIP version as RIPv2.
<Sysname> system-view
[Sysname] rip 100
[Sysname-rip-100] version 2
Related commands
rip version