R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

107
verbose: Displays detailed information. Without this keyword, the command displays brief information.
Usage guidelines
If you use this command on routers in a stub area, the commands displays no ASBR information.
Examples
# Display brief information about routes to the ABR or ASBR.
<Sysname> display ospf abr-asbr
OSPF Process 1 with Router ID 192.168.1.2
Routing Table to ABR and ASBR
Type Destination Area Cost Nexthop RtType
Inter 3.3.3.3 0.0.0.0 3124 10.1.1.2 ASBR
Intra 2.2.2.2 0.0.0.0 1562 10.1.1.2 ABR
# Display detailed information about routes to the ABR or ASBR.
<Sysname> display ospf abr-asbr verbose
OSPF Process 10 with Router ID 101.1.1.11
Routing Table to ABR and ASBR
Destination: 1.1.1.1 RtType : ASBR
Area : 0.0.0.1 Type : Intra
Nexthop : 150.0.1.12 BkNexthop: 0.0.0.0
Cost : 1000 SpfCost : 30
Table 24 Command output
Field Descri
p
tion
Type
Type of the route to the ABR or ASBR:
• Intra—Intra-area route.
• Inter—Inter-area route.
Destination Router ID of an ABR or ASBR.
Area ID of the area of the next hop.
Cost Cost from the router to the ABR or ASBR.
SpfCost SPF cost.
Nexthop Next hop address.
BkNexthop Backup next hop address.
RtType Router type: ABR or ASBR.
display ospf abr-summary
Use display ospf abr-summary to display information about summary routes on the ABR.
Syntax
display ospf [ process-id ] [ area area-id ] abr-summary [ ip-address { mask-length | mask } ] [ verbose ]