R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

111
Related commands
asbr-summary
display ospf event-log
Use display ospf event-log to display OSPF log information for a process.
Syntax
display ospf [ process-id ] event-log { peer | spf }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the
command displays OSPF log information for all processes.
peer: Specifies neighbor log information.
spf: Specifies route calculation log information.
Usage guidelines
Route calculation logs show the number of routes newly installed to the IP routing table.
Neighbor logs include information about the following events:
• The OSPF neighbor state goes down.
• The OSPF neighbor state goes backward because the local end receives BadLSReq,
SeqNumberMismatch, and 1-Way events.
Examples
# Display OSPF route calculation log information for all processes.
<Sysname> display ospf event-log spf
OSPF Process 1 with Router ID 1.1.1.2
SPF log
Date Time Duration Intra Inter External Reason
2012-06-27 15:28:26 0.95 1 1 10000 Intra-area LSA
2012-06-27 15:28:23 0.2 0 0 0 Area 0 full neighbor
2012-06-27 15:28:19 0 0 0 0 Intra-area LSA
2012-06-27 15:28:19 0 0 0 0 external LSA
2012-06-27 15:28:19 0.3 0 0 0 Intra-area LSA
2012-06-27 15:28:12 0 1 0 0 Intra-area LSA
2012-06-27 15:28:11 0 0 0 0 Routing policy
2012-06-27 15:28:11 0 0 0 0 Intra-area LSA