R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

112
Table 28 Command output
Field Descri
p
tion
Date/Time Time when the route calculation starts.
Duration Duration of the route calculation, in seconds.
Intra Number of intra-area routes newly installed to the IP routing table.
Inter Number of inter-area routes newly installed to the IP routing table.
External Number of external routes newly installed to the IP routing table.
Reason
Reasons why the route calculation is performed:
• Intra-area LSA—Intra-area LSA changes.
• Inter-area LSA—Inter-area LSA changes.
• External LSA—External LSA changes.
• Configuration—Configuration changes.
• Area 0 full neighbor—Number of FULL-state neighbors in Area 0 changes.
• Area 0 up interface—Number of interfaces in up state in Area 0 changes.
• LSDB overflow state—Overflow status changes.
• AS number—AS number changes.
• ABR summarization—ABR summarization changes.
• GR end—GR ends.
• Routing policy—Routing policy changes.
• Intra-area tunnel—Intra-area tunnel changes.
• Others—Other reasons.
# Display OSPF neighbor log information for OSPF process 1.
<Sysname> display ospf 1 event-log peer
OSPF Process 1 with Router ID 1.1.1.1
Neighbors log
Date Time Local Address Remote Address Router ID Reason
2012-12-31 12:35:45 197.168.1.1 197.168.1.2 2.2.2.2 IntPhyChange
2012-12-31 12:35:19 197.168.1.1 197.168.1.2 2.2.2.2 ConfNssaArea
2012-12-31 12:34:59 197.168.1.1 197.168.1.2 2.2.2.2 SilentInt
Table 29 Command output
Field Descri
p
tion
Date/Time Time when the neighbor state changes.
Local Address Local address of the neighbor relationship.
Remote Address Peer address of the neighbor relationship.
Router ID Neighbor router ID.