R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

119
Backup designated router: 0.0.0.0
Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1
FRR backup: Enabled
Enabled by interface configuration (including secondary IP addresses)
MD5 authentication enabled.
The last key is 3.
The rollover is in progress, 2 neighbor(s) left.
Table 33 Command output
Field Descri
p
tion
Interface Information about the interface, such as the IP address.
Timers OSPF timers: hello, dead, poll, retransmit, and transmit delay.
FRR backup Indicates whether LFA calculation is enabled on an interface.
Enabled by interface
configuration (including
secondary IP addresses)
OSPF is enabled on the interface (including secondary IP addresses).
MD5 authentication
enabled
Authentication mode.
The last key Current MD5 authentication key ID.
neighbor(s) Number of neighbors that have not completed key rollover.
display ospf lsdb
Use display ospf lsdb to display OSPF LSDB information.
Syntax
display ospf [ process-id ] lsdb [ area area-id | brief | [ { asbr | ase | network | nssa | opaque-area
| opaque-as | opaque-link | router | summary } [ link-state-id ] ] [ originate-router advertising-router-id
| self-originate ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the
command displays LSDB information for all OSPF processes.
area area-id: Specifies an OSPF area by its ID. The area ID is an IP address or a decimal integer in the
range of 0 to 4294967295 that is translated into the IP address format. Without this option, the
command displays LSDB information for all OSPF areas.
brief: Displays brief LSDB information.
asbr: Displays Type-4 LSA (ASBR Summary LSA) information in the LSDB.
ase: Displays Type-5 LSA (AS External LSA) information in the LSDB.