R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

139
Field Descri
p
tion
Transmit error Packets with error when being transmitted.
Interface down Shutdown times of the interface.
Unknown neighbor Packets received from unknown neighbors.
HELLO: Netmask mismatch Hello packets with mismatched mask.
HELLO: Hello-time mismatch Hello packets with mismatched hello timer.
HELLO: Dead-time mismatch Hello packets with mismatched dead timer.
HELLO: Ebit option mismatch Hello packets with mismatched E-bit in the option field.
DD: MTU option mismatch DD packets with mismatched MTU.
DD: Unknown LSA type DD packets with unknown LSA type.
DD: Ebit option mismatch DD packets with mismatched E-bit in the option field.
ACK: Bad ack Bad LSAck packets for LSU packets.
ACK: Unknown LSA type LSAck packets with unknown LSA type.
REQ: Empty request LSR packets with no request information.
REQ: Bad request Bad LSR packets.
UPD: LSA checksum bad LSU packets with wrong LSA checksum.
UPD: Unknown LSA type LSU packets with unknown LSA type.
UPD: Less recent LSA LSU packets without the most recent LSA.
Related commands
reset ospf statistics
display ospf vlink
Use display ospf vlink to display OSPF virtual link information.
Syntax
display ospf [ process-id ] vlink
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the
command displays the OSPF virtual link information for all OSPF processes.
Examples
# Display OSPF virtual link information.
<Sysname> display ospf vlink
OSPF Process 1 with Router ID 3.3.3.3