R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

194
[Sysname] isis 1
[Sysname-isis-1] circuit-cost 11 level-1
Related commands
• cost-style
• isis cost
cost-style
Use cost-style to set a cost style.
Use undo cost-style to restore the default.
Syntax
cost-style { narrow | wide | wide-compatible | { compatible | narrow-compatible } [ relax-spf-limit ] }
undo cost-style
Default
Only narrow cost style packets can be received and sent.
Views
IS-IS view
Predefined user roles
network-admin
Parameters
narrow: Receives and sends only narrow cost style packets. The narrow cost is in the range of 0 to 63.
wide: Receives and sends only wide cost style packets. The wide cost is in the range of 0 to 16777215.
compatible: Receives and sends both wide and narrow cost style packets.
narrow-compatible: Receives both narrow and wide cost style packets, but sends only narrow cost style
packets.
wide-compatible: Receives both narrow and wide cost style packets, but sends only wide cost style
packets.
relax-spf-limit: Allows receiving routes with a cost greater than 1023. If this keyword is not specified, any
route with a cost bigger than 1023 will be discarded. This keyword is only available when compatible or
narrow-compatible is included.
Examples
# Configure the router to send only narrow cost style packets, but receive both narrow and wide cost style
packets.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] cost-style narrow-compatible
Related commands
• circuit-cost
• isis cost