R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

196
display isis
Use display isis to display configuration information for an IS-IS process.
Syntax
MSR2000/MSR3000:
display isis [ process-id ]
MSR4000:
display isis [ process-id ] [ standby slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies a process by its ID in the range of 1 to 65535. Without this argument, the command
displays configuration information for all IS-IS processes.
standby slot slot-number: Displays backup IS-IS configuration information for a card. Without this option,
the command displays IS-IS configuration information.
Examples
# Display IS-IS configuration information.
<Sysname> display isis
IS-IS(1) Protocol Information
Network-entity : 10.0000.0000.0001.00
IS-level : level-1-2
Cost-style : Wide
Fast reroute : Disabled
Preference : 15
LSP-length receive : 1497
LSP-length originate
level-1 : 1497
level-2 : 1497
Maximum imported routes : 1000000
Timers
LSP-max-age : 1200
LSP-refresh : 900
SPF intervals : 5 50 200
IPv6 enabled
Multi-topology : Standard
Preference : 15
Maximum imported routes : 1000000
SPF intervals : 5 50 200