R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

203
Field Descri
p
tion
Hello timer value Interval for sending Hello packets.
Hello multiplier value Number of invalid Hello packets.
Lsp timer value Minimum interval for sending LSP packets.
LSP max transmition count Number of LSP packets sent each time.
Cost Cost of the interface.
IPv6 cost IPv6 link cost of the interface.
Priority DIS priority.
Retransmit timer value Retransmission interval for LSPs on a P2P link.
MPLS TE status MPLS TE status: Enabled or Disabled.
LDP state
LDP state:
• Init—LDP is not reported.
• No-LDP—LDP is not configured.
• Not ready—LDP session is not established.
• Ready—LDP session is established.
LDP sync state
LDP synchronization state:
• Init—Initialized.
• Achieved—Synchronized.
• Max cost—Maintain the maximum cost.
IPv4 BFD
Whether BFD for IS-IS is enabled:
• Disabled.
• Enabled.
IPv6 BFD
Whether BFD for IPv6 IS-IS is enabled:
• Disabled.
• Enabled.
FRR LFA backup
Whether LFA calculation is enabled:
• Disabled.
• Enabled.
IPv4 prefix-suppression
Whether IPv4 IS-IS prefix suppression is enabled:
• Disabled.
• Enabled.
IPv6 prefix-suppression
Whether IPv6 IS-IS prefix suppression is enabled:
• Disabled.
• Enabled.
IPv4 tag IPv4 tag value of the interface.
IPv6 tag IPv6 tag value of the interface.
IPv4-Unicast IPv4 unicast topology supported by the interface.
Topology IPv4 unicast topology name.
Topology ID IPv4 unicast topology ID.
# Display IS-IS interface statistics.